DESIGN STUDIOStage one of five

Design a plant on
the real roof

Trace the outline on satellite imagery, place what is already up there, run the sun across a year, and pack the modules you have actually chosen.

Start free See the plans
What it does

A layout, not an estimate

Most quoting starts with a spreadsheet and a guess at the panel count. This starts with the roof.

Trace on satellite imagery

Draw the outline at the zoom the imagery actually has, or work from a rectangle, a circle or an L-shape where that is enough.

Obstacles and keep-out areas

Water tanks, lift rooms, ducts, parapets and the areas you are not being paid for. The packer works around them.

A shadow study across the year

Both solstices and the equinoxes, half-hour steps, and a heatmap of how much light each panel actually gets.

Packing from the real module

Dimensions come from the panel you picked in the catalogue, with your row spacing, tilt and walkway allowances.

3D you can turn around

The building, the array, the parapet and the obstacles, with the sun where it will be at any hour of any day.

Stringing that checks itself

Series length against the inverter’s MPPT window and DC limits, with the cold-morning voltage worked out rather than assumed.

Try it

A sample roof, in the real viewer

The geometry is made up; everything else is the studio. Drag to orbit, scroll to zoom, and run the sun across the day.

Loading the 3D view…
How it works

Four passes over the same roof

Each one narrows what the next has to decide.

01

Trace it

The outline, then the obstacles and any areas the job does not cover.

02

Run the sun

A shadow study across the year tells you which parts of the roof are worth filling.

03

Pack it

Modules placed at your spacing and tilt, around everything in the way.

04

String it

Series and parallel worked against the inverter you chose, with the diagram drawn for you.

What comes out

Everything downstream comes from here

The layout is not a picture you attach to a quote. It is where the panel count, the cable lengths, the bill and the payback all come from.

  • Panel count and system size in kWp, from the roof rather than a guess
  • Annual generation modelled from PVGIS at the site coordinates
  • DC and AC cable runs measured along the route, not estimated
  • A single line diagram drawn from the stringing you approved
  • A satellite image with the array on it, for the proposal
  • A DXF export when the drawing has to leave the platform
See the bill of materials

The traced roof

Area, obstacles, usable space

The packed layout

Panel count and capacity

The stringing

Series length and the diagram

The bill of materials

Every line the design implies

Quote requests

To the Trade Partners carrying those parts

Questions

What EPCs ask about the studio

Mostly about imagery, accuracy and what it exports.

Something not answered here?

Talk to us

Google Maps, traced at the highest zoom the imagery supports for the site. Where that is too coarse, you can work from a still at higher detail or draw the shape from dimensions you measured.

Solar position is calculated from the site coordinates and the date, and shadows are cast from the obstacle heights you enter. It is as accurate as the heights you give it.

Yes. Pick the module from the catalogue and the packer uses its real dimensions. Change the module and the layout re-packs.

Yes. The automatic pack is a starting point; you can add, remove, move and tilt individual panels, and the edits survive a re-pack.

A DXF of the roof and array, a satellite image with the layout drawn on it, and the single line diagram. The bill of materials exports separately.

You can share a link to the 3D view. They can turn the design around on a phone, and it carries the geometry without the pricing.